The details · Gutter corners and downspouts
Gutter corners and downspouts: what a clean install looks like
Same kind of house, same kind of gutter. The difference is in the corners and the downspouts.



- Downspout tucked under the overhang, elbows tight to the wall
- Runs plumb and parallel to the corner
- Corner hand-mitered from the same coil as the run
- Gutter, trim and downspout in one matched color


- Downspout hung off the end of the gutter at an angle
- Kinked joints that lean away from the corner
- End cap sticking out past the roof edge
- Bare wood and gaps left at the corner
Why it matters
Gutters are one of the few parts of a roof system you see every day from the driveway. A clean install reads as part of the house; a rushed one looks added on. The details above are easy to check from the ground on any house, including yours.
Corners and downspouts are also where water does the most work. A downspout that leaves the gutter at an angle or kinks halfway down slows the flow, and joints that pull away from the wall loosen over a few winters of freeze and thaw.